Publicité
STEP 1
Disengage cabinet slide
assembly from unit by
pressing release levers on the
two vertical slides and pulling
unit away from cabinet slide
assembly
(See Figure 1).
NOTE: Center slide does
not have a release lever, pull
strongly to separate.
STEP 2
Center cabinet slide assembly
on cabinet floor 7/8" from
front outside edge of cabinet
(See Figure 2).
Note: If installing into a
cabinet with an inset door,
move the slide assembly
back additionally the
thickness of the door.
7
3
64
32
2
mm
STEP 3
Mount cabinet slide assembly
to cabinet floor with (4) #8 x
3/4" screws
(See Figure 3).
#2
2
FIG. 1
FIG. 2
#2
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
7/8"
Screws installed to the floor
Publicité
