Setting The Stride Length - Omron HJ-720ITCAN Guide De L'utilisateur

SETTING THE STRIDE LENGTH

Setting range: 30 to 120 cm
The stride length flashes on the display.
1.
Press the MEMO/
to advance by increments of 1 cm.
Press and hold the button to advance the
stride in 10 cm inches increments.
NOTE:
Press the MODE/EVENT Button to
return the stride length to 40 cm.
2.
Press the SET Button to the stride
length.
The number of steps and time will display.
All the settings are completed.
To change the time, weight, or stride length after the setting is
completed:
1.
Press and hold the SET Button for 2 seconds.
2.
Change the setting.
NOTE:
If setting does not need to be changed, press the set button to advance
to the next setting.
Button
15