Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Warning
- Never point the air flow directly at people.
- Never cover the fan and protective grille during operation. The air must be able
to circulate freely. Danger of overheating!
- Keep the fan at least 50 cm away from objects and walls.
- Route the power cable in such a way that there is no danger of tripping and thus
no risk of the unit being knocked over or pulled down.
- Ensure sufficient lighting (at least 500 lux).
Warning of electrical voltage
- The voltage specification on the type plate must correspond to the existing
mains voltage.
- The mains socket at which the fan is operated must be earthed and properly fused.
- Do not bend, tension, pinch or run over the power cord. Keep it away from heat
sources.
- Check the power cord and the power plug for damage on a regular basis, but always
before use. If any damage is visible, the device must not be used any more. The
mains cable may only be replaced by a qualified person, e.g. a qualified electrician.
- Never touch the unit with wet or damp hands.
- Do not pull the power plug from the socket by the cable. When unplugging, grasp
the plug and not the cable.
- Only use an extension cable suitable for the power consumption of the fan.
- WATER MUST NEVER ENTER THE FAN! If the unit has become wet, immediately
pull out the mains plug. Have the fan checked by a qualified electrician before
using it again.
- Never immerse an electrical appliance in water or other liquids.
- Do not use the appliance in places where it may fall into water or be pushed
into. Never reach for the appliance that has fallen into the water. Immediately
switch off the mains fuse and unplug the appliance.
- Never open the device yourself. Incorrectly repaired electrical appliances are a
danger to the health and life of you and others.
- Repairs may only be carried out by a qualified electrician or an authorised ser-
vice centre.
Description of the fans
The fans of the SPEED-G series are designed for a high volume flow. They are used for air circula-
tion indoors. The motor is equipped with an automatic overheating protection, which interrupts
the power supply when overheating begins. When the motor has cooled down sufficiently, the
unit switches on again.
10
Publicité
Table des Matières
