Using External Programming; Window Open Function; Consumption Indicator - Atlantic SOKIO Notice D'utilisation Et D'installation

The device follows the external control of your installation via pilot wire link.
Select Source prog. with
Choose Ext. control with
This function can not be used in BASIC mode
Used to detect variations in temperature related to the opening and closing of your windows.
If you forget to switch off your device when a window is open for a long time, this function
lets you get around this and prevents your device from heating up unnecessarily.
The device automatically switches to Frost Protection mode (7°C) when it detects an open
window and rises to the setpoint temperature when it detects that the window has been
closed (the detection time is variable).
We do not recommend using this function in corridors and rooms located near an entry
door which opens to the outside.
Irrespective of the mode, you can access the power consumption indicator through the
information menu. It will display consumption in KWh and the price in euros.
You can see the cost and the number of KWh consumed.
You can change the KWh price by scrolling to € using the
.
You can also reset the meter by moving to RAZ then reset.

USING EXTERNAL PROGRAMMING

. Confirm
and confirm

WINDOW OPEN FUNCTION

CONSUMPTION INDICATOR

.
.
34
arrow, the confirm with