Using Internal Programming; Modifying The Programs; Copying A Program; Using External Programming - Atlantic SFLC DIG2 Mode D'emploi

USING INTERNAL PROGRAMMING

Anticipating heating
Your appliance is fitted with a function which enables it to anticipate heating when you use
programming.
When you set your appliance's programming, it will anticipate the heating according to the
temperature increase time so that your room is at the right temperature when you arrive.
For example: if you set your programming with a comfort return at 3pm, the appliance will
start up before this to anticipate the heating of your room (between10 minutes and one
hour).
M
odifying the ProgrAMs
You may program up to 3 Comfort temperature ranges for each day of the week. Outside
the Comfort ranges, lowering the temperature is set in "Programming" - "Lower ECO T°".
19. °
0
Select the day with
Select . Validate
Select the start time with
Validate . You then move onto the next Comfort window.
c
oPying A ProgrAM
You may copy a day's program to one or more days.
Select . Validate
Scroll through the days with
To validate the copy, select "Copy". Validate
Example: Program copy from Monday to Tuesday,
Mon
Tue Fri
Thursday, Friday.
Wed Sat
Thur Sun
Copy

USING EXTERNAL PROGRAMMING

The appliance follows your installation's external command orders by Pilot Wire link. The
programming must be inactive for this.
19. °
0
. Validate .
.
or . Validate
.
or . Validate the day to copy the program with
. Select the end time with
.
29
EN
or .
.