Adjustment Of The Light; Adjustment Of The Heater; Humidistat; Room Temperature - TurMix AX 600 Mode D'emploi

4.9. Light adjustment
4.10. Heater adjustment
4.11. Room relative humidity
4.1. Room temperature
Turmix-AX 600-04.indd 60
All manuals and user guides at all-guides.com
Normally the blue light is turned on as soon as the unit is connected to the
power supply. In order to turn the blue light off push the LIGHT button (the
light will go off and the
ton again will turn the light back on. When opening the front door the elec-
tricity is disconnected and the light extinguishes.
To operate the heating function, press the TEMP&HEAT button. Pressing the
button again will turn the heating function off.
The heating function may be operated with the compressor or independent of
it. The heater will only function at temperatures below 25 °C.
The heating improves the dehumidification performance in chilly rooms.
The relative humidity is normally indicated in the 2 digit display (relative
humidity in %).
If the relative humidity is lower then 35 % the 2 digits indicate LO. If the rela-
tive humidity is higher then 95 % the 2 digits indicate HI.
Push the TEMP&HEAT button for 2 seconds and the LCD will indicate the

room temperature.

icon on the LCD will disappear). Pushing the but-
60 60
22.1.2007 17:33:52 Uhr