Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
58
58
4.4. Setting the time
4.5. Switching the unit ON and OFF
4.6. Setting the humidity level
4.7. Setting the fan speed
4.8. Setting the Timer
Turmix-AX 600-04.indd 59
All manuals and user guides at all-guides.com
The time is continuosly shown on the LCD display. When plugging in the
power plug (or after power failure) 12:00 is shown on the display.
In order to set the time push the SET button for 2 seconds (the left-sided
hour display begins to blink). Adjust the hour by pressing the p
button. To set the minutes push the SET button again for 2 seconds (the
right-sided minutes display begins to blink). Press the p or q
adjust the minutes. Press the SET button to conclude the setting.
Push the
button to turn on the unit. Pushing the button again will turn the
unit off.
To set the desired relative humidity level repeatedly press the p or q but-
ton:
CONT: continuous dehumidification regardless of the room's humidity
50 %: maintains the relative humidity at around 50%, ideal for personal
comfort and dry storage
60 %: maintains the relative humidity at around 60% for personal comfort
70 %: maintains the relative humidity at around 70%
80 %: maintains the relative humidity at around 80%. In most cases the
compressor will turn off
Press the SPEED button to change the fan speed, the chosen speed will be
indicated on the LCD,
The timer switches the unit on and off automatically.The timer only operates
correctly if the time on the unit is set accurately (see 4.4.)
When the unit is turned on:
Press the TIMER button (the left-sided hour display begins to blink) and
adjust the desired turn off time by pressing the p or q button. Press the
TIMER button again (the right-sided minutes display begins to blink). Adjust
the minutes by pressing the p or q button. (The minutes can be set in
steps of 5 minutes).
If you would like the unit to turn itself back on at a later time please repeat
the above procedure.
To activate the timer settings push the SET button once again.
When the unit is turned off:
Repeat the procedure as mentioned above. First set the turn on time (and if
desired afterwards the turn off time).
Cancelling the timer:
Cancel the timer setting(s) by pressing the TIMER button.
for the high speed and
for the low speed.
59
DE
DE
or q
button to
FR
IT
GB
22.1.2007 17:33:52 Uhr
Publicité
Table des Matières
