SOUNDMASTER ICD3030 Manuel D'instructions page 38

Press the "BACK" button to view a list of stations and press "OK" to select. Once selected, the
station plays and the screen shows information about station, track or show as broadcast.

Presets
To store an DAB radio preset, press and hold the "PROGRAM" on Remote Control until the
display shows the "Save preset" screen. Select one of the 40 presets to save the current station
and press "OK" to confirm.
To select a preset, press the "PROGRAM" on Remote Control, then select one of the listed
preset stations and press "OK" to confirm. Or press 0 to 9 on the Remote Control to directly
recall the presets.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as program name, track
title and contact details. Stereo broadcasts are indicated with an icon at the bottom of the
screen. To view further information, press "INFO" button.
Each time you press "INFO" button on the radio, another set of information is displayed, cycling
through DLS text, program type, ensemble name/frequency, signal strength/error rate, bite
rate/codec/channels and today's date.
SETTINGS

Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.
You can change DRC as off, low or high.

Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists
valid stations first, alphanumerically, then off-air stations.
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station
and where broadcast.
To full scan, press "INTRO/AMS" remote key. The frequency
display starts to run and scans the FM full band.
To manual scan, press and hold "
frequency display starts to run and scans the FM band and stops
at the next station.
FM
" or " " button. The
14
ICD3030 / English Instruction Manual