Silver Cross SURF Mode D'emploi page 13

13.1
14.1
Attaching the seat unit to your
chassis
WARNING: Ensure all locking
devices are engaged before use.
13.1 To attach your Surf seat unit to the
Surf chassis hold the seat unit above
the
chassis. Locate the seat unit chassis
connector onto the seat attachment
post of the chassis. Ensure the seat
unit 'clicks' into place. The seat unit
can be fitted forward or rearward
facing. Lift the seat unit gently by
the bumper bar to check the seat has
locked into place.
To adjust the seat position (see point
20.1).
Detaching the seat unit from
your chassis
14.1 With the seat unit facing you press
the red release button first located on
the side of the seat unit until it clicks
into place.
WARNING: This button is
now unlocked. It will re-lock
automatically when the seat
is re-attached to the chassis.
Then while pressing and holding the
other black release button on the
opposite side of the seat unit, lift the
seat unit from the chassis using the
bumper bar.
WARNING: Always ensure
your bumper bar is
attached when your child is
in the seat unit.
The seat unit will now lift clear of the
chassis.
NOTE: Remove the child from the
seat unit before detaching from
your chassis.
13
silvercrossbaby.com