Store The Machine - STERWINS EVB2.4 Notice De Montage, Utilisation Et Entretien

CAUTION ! ALWAYS WEAR SAFETY GLASSES. WEAR A FILTER
MASK IF THE OPERATION IS DUSTY. USE OF PROPER GLOVES AND
SUBSTANTIAL FOOTWEAR IS ALSO RECOMMENDED.
5. TRANSPORTATION
Transporting the machine may require that you meet certain requirements specific to your
country. Please make sure to respect them by contacting the authorities of your country, in
order to respect them all.
Disconnect the plug from the power source. Let the machine cool for 2 hours outside before
transport it. Hold the product . Ensure temperature during transportation will never be out of
temperature range given on chapter storage. Protect the product from any heavy impact or
strong vibrations which may occur during transportation in vehicles. Secure the product to
prevent it from slipping or falling over.
6. WINTERING & STORAGE

6.1 STORE THE MACHINE

Disconnect the plug from the power source. Let the machine cool for 2 hours outside before
storing it. Be sure to secure the unit while transporting. Examine the unit thoroughly for worn,
loose or damaged parts. Clean the product before storing.
Wintering : illustration 6.1
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to
24°C. Cover it in order to provide added protection. Do not expose the product to sunlight. Make
sure the product is always protected from cold and humidity. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it
against dust.
7. MAINTENANCE
7.1 CLEANING
Cleaning the product : illustrations 5.1 and 5.2
Disconnect the plug from the power source. Let the machine cool for 2 hours outside before
cleaning it. Disassemble and clean the product part by part.
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the
equipment with a cloth. It is highly suggested that you clean the device after every use. Do not
use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
product.
181
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN