Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FMC021 Traduction De La Notice D'instructions Originale

Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.

Technical data

Voltage
V
DC
No-load speed Min
Max. torque Nm
(PTI Rating)
Impact Rating bpm
Chuck capacity
mm
Max Drilling capacity
Steel/wood/
mm
masonry
Weight kg
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
Voltage
Capacity
Type
Level of sound pressure according to EN 62841:
Sound pressure (L ) 82,0 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 93,0 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Impact drilling into concrete (a ) 11.7 m/s
h, ID
Drilling into metal (a ) 1.0 m/s , uncertainty (K) 1.5 m/s
2
h, D
0-400, 0-1500
-1
0-6000 0-22500
N472239/N472243
V
AC
V
DC
A
70 (1.5AH)
min
FMC086L
V
DC
Ah
, uncertainty (K) 1.5 m/s
2 2
2
(Original instructions)
The Supply of Machinery (Safety)
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
FMC021
10.8
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
26
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
10
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
10/20/8
1.0
230
22
1.25

EC declaration of conformity

10.8
1.5
Li-Ion
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
For more information, please contact Stanley Fat Max at the
Declaration of conformity
Regulations 2008
FMC021 - Impact Drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Stanley Fat Max.
Director - Consumer Power Tools
Stanley Fat Max UK, 270 Bath Road, Slough
%
MACHINERY DIRECTIVE
FMC021 - Impact Drill
2011/65/EU.
ENGLISH
Ed Higgins
Berkshire, SL1 4DX
United Kingdom
09/06/2021
9