Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Check that there are no loose parts
Check the status of the blades
Check the oil level
Change the engine oil
Clean the air filter
Check the spark plug
Sharpen the blade
It is necessary to stop the engine and check that the
cutting tool is stopped before cleaning or transporting
the machine.
It is necessary to stop the engine cleaning or
transporting the machine.
Before performing any maintenance or repair
on the machine make sure that the engine has
stopped and remove the spark plug pipe.
Only perform machine maintenance with the machine
on a flat, cleared surface.
Do not attempt to repair the lawnmower when it is on
or in motion.
WARNING! Do not modify the machine or cutting
elements (blade). Improper use of these elements can
cause SERIOUS PERSONAL DAMAGE OR DEATH.
•
•
•
•
•
•
•
•
Use ony suitable replacement for this machine in
order to obtain a proper performance of the machine.
This replacement can be found in the official
distributors of the machine. The use of other spare
parts can cause risks, damage to the user, people
around and the machine.
Do not adjust the carburetor. If necessary, take your
machine in for service. Carburetor adjustment is
complicated, and only the technical maintenance
service must do them. Incorrectly setting the
carburetor may cause damage to the engine and will
be cause for cancellation of the warranty.
Removing the security devices, improper
maintenance, or replacements with non-original spare
parts can cause injury.
47/164
•
•
•
•
•
•
•
•
•
English
•
Publicité
Table des Matières
