Troubleshooting - Sony AC-VQL1BP Mode D'emploi

Troubleshooting

Please check the following before contacting your nearest Sony dealer. If this unit does not
operate correctly after check, contact your nearest Sony dealer.
The video equipment does not work.
•The power plug is disconnected from the wall outlet.
t Connect the power plug to the wall outlet.
•The connecting cord is not connected correctly.
t Connect the connecting cord correctly.
•The output change switch is set to "CHARGE."
t Set the output change switch of the using system to "VCR/CAMERA."
The battery pack is not charged.
•The power plug is disconnected from the wall outlet.
t Connect the power plug to the wall outlet.
•The battery pack is not attached to this unit correctly.
t Check the direction of the battery pack and reattach the battery pack correctly.
•The output change switch is set to "VCR/CAMERA."
t Set the output change switch of the using system to "CHARGE."
•The first attached battery pack is charging.
t After charging the first attached battery pack is completed, charging of the other battery
pack starts.
•The full charged or nearly full charged battery pack is attached to this unit.
t Charging skips with the full charged battery pack.
•It is in the temperature protected condition.
t Use this unit at the recommended temperature range. Even if it was at the recommended
temperature range when starting charging, the temperature rises during charging, it will
exceed the recommended temperature range and may become in the temperature protected
condition.
Power immediately turns off even though there is sufficient
battery life, or the indicated battery life differs from the actual
battery life.
•Continuation charging or discharging is repeated several times.
t Recharge the battery pack after using until it has been emptied. The remaining time will be
indicated correctly.
Display is not changed.
t Refer to "Notes on the battery life display."
24
-GB