Reset To Factory Defaults; Software Update; Channel; Update List - Samsung DCB-H360R Consignes D'utilisation

OPERATING THE RECEIVER

1.3 Reset to Factory Defaults

This is to recover the Factory set values in case the user has
encountered some problems after changing any values of
channel data and others which may be in error.
The screen display will be as follows:
At the request window, if you press the OK key, the receiver
will be reset to factory default settings automatically.
N N o o t t e e : This causes your previous settings to be deleted!
All settings and information including channel data will
be deleted.
Press the EXIT key to exit the menu .
●

1.4 Software Update

This option is enabled only if your cable provider sends software for your STB.
To upgrade the software, place the cursor on Installation ‹ Software Update menu and
press the OK key. If new software is available, banner "Start Software Updating Process ?"
will be displayed. There is also information about estimated time of software download.
Press the OK key to confirm and start Software Updating process.
If there is newest software on your STB "You don't need to update software !" will be displayed.
N N o o t t e e : STB automatically reboots for software upgrading process. During the upgrading
process, TV screen will remain blank for approximately 10 minutes. Window display at
the STB front panel will show the progress. Service will be resumed automatically after
the upgrade is completed.
Press the EXIT key to exit the menu.
●

2. Channel

The "Channel" menu has three functions:
Saving changes on channel list by select Update List and it
provides making four favourite lists and set channel lock,
as you want.
Enter the PIN Code.
●
If you have not entered your own PIN Code, 0000 applies which
was set at the factory.

2.1 Update List

When some new channels will be transmitted to your cable
network, these channels would be shown on channel list
green colored. To save these channels, use Channel ‹ ‹ ¤ ¤ Update
List.
GB-24 D I G I T A

2.2 Favorite Channels

You can immediately register the present channel to the desired
Favorite Group.
In addition, you can register a channel to multiple favorite groups.
Select the desired Favorite Group(FAV1~FAV4) using the
●
FAV.CH key.
Select the desired channel list using the ƒœ or numeric keys
●
at the TV or RADIO list window.
Press the RED key and then register the selected
●
channel at the Favorite Group.
Then press the OK key for confirmation.
●
You can change TV list or Radio list by the TV/RADIO key and change favorite list
by the FAV.CH key.
When you press the TV/RADIO key, TV list and Radio list are toggled.
●
Press the FAV.CH key to select another favorite list.
●
Press the EXIT key to exit the menu.
●
To delete channels from Favorite Group:
Select a channel list to delete with the ƒœ¤ keys.
●
Press the RED key to delete the selected channel from the favorite channels.
●
Press the EXIT key to exit the menu.
●
N N o o t t e e : One favorite list can contain max 200 channels.

2.3 Set Channel Lock

Select the TV or RADIO channel window by pressing the
●
¦‹¤keys.
Focus the channel by pressing the ƒœ¤keys.
●
Select the channel lock by pressing the RED key.
●
Press the OK key for confirmation.
●
This will lock the channel. Whenever you need to view the
channel, you will have to enter the PIN Code at the request
window.
To cancel the lock:
Press the RED key again in order to cancel the lock.
●
Press the EXIT key to exit the menu .
●
.
L C A B L E R E C E I V
OPERATING THE RECEIVER
E R GB-25