BASIC FUNCTIONS
5. Channel List
Press the CH LIST key while you are viewing a program.
●
Select list by pressing the TV/RADIO key.
●
The
icon behind the channel name symbolises scrambled
channel, and the
icon behind the channel name shows
locked channel.
Select the channel by pressing the ¤keys on the remote
●
control.
Press the OK key to watch that channel.
●
The colour key corresponds the following service list.
YELLOW key : Favorites
●
RED key
: Alphabetical
●
Press the
(Page Up/Dn) keys to move to next or previous page.
●
Press the EXIT key to exit.
●
5.1 Favorite Channel List
Press the YELLOW key on the remote control to select the
●
group of favorite channel list.
Press the YELLOW key to switch between favorite channel list
●
and channel list.
Use the keys to select a favorite group or a channel that
●
you want.
Press the
(Page Up/Dn) keys to move to next or previous page.
●
Press the EXIT key to exit
●
5.2 Alphabetical Channel LIst
Press the RED key on the remote control to select the
●
Alphabetical channel list.
Press the RED key to switch between alphabetical channel list
●
and channel list.
Use the keys to select a Alphabetical group or a channel
●
that you want.
Press the EXIT key to exit.
●
GB-18
D
I
G
I
T
A
6. Guide (EPG) Menu
EPG-Electronic Program Guide
The electronic program guide gives you information
for the channels.
N N o o t t e e
: 1. This service depends on service provider.
2. After receiver recognized the GMT-time
from the signal which takes few seconds,
it can display correct EPG information.
Press the GUIDE key while you are viewing a program.
●
RED key is for moving back to the previous date.
●
GREEN key is for moving to the next coming date.
●
YELLOW key can be used for scroll up, if there is more information than one page.
●
BLUE key can be used for scroll down, if there is more information than one page.
●
Time interval can be adjusted by press keys as followings on EPG screen:
1 key: 1 hour and 30 minutes
With the TV/RADIO key you can browse among the various programs lists.
Select the channel by pressing the keys and press the OK key to watch this channel.
●
When the TIMER key on the remote control is pressed in the EPG screen, if the current channel
●
involves an event, timer is set immediately and the set timer is indicated on the EPG screen.
A program that has been set in this way is indicated on Timer Setting.
L
C
A
B
L
E
R
E
C
E
I
V
BASIC FUNCTIONS
2 key: 30 minutes
3 key: 15 minutes
E
R
GB-19