Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
Safety instructions
General safety information
2
Safety instructions
2.1
General safety information
}
Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material!
Lenze drive components ...
ƒ
– ... must only be used as directed.
– ... must never be commissioned in the event of visible damage.
– ... must never be technically modified.
– ... must never be commissioned before they have been completely mounted.
– ... must never be operated without the covers required.
– ... can − depending on the degree of protection − have live, movable or rotating
parts during operation. Surfaces can be hot.
For Lenze drive components ...
ƒ
– ... use only the accessories approved.
– ... use only original spare parts from Lenze.
Observe all specifications given in the attached documentation.
ƒ
– This is the prerequisite for safe and trouble−free operation and achieving the
specified product features.
– The specifications, processes, and circuitry described in this document are for
guidance only and must be adapted to your own application. Lenze does not take
responsibility for the suitability of the process and circuit proposals.
Only qualified personnel may work with and on Lenze drive components.
ƒ
According to IEC 60364 and CENELEC HD 384, these are persons ...
– ... who are familiar with the installation, assembly, commissioning and operation
of the product.
– ... who have the corresponding qualifications for their work.
– ... who know all regulations for the prevention of accidents, directives and laws
applicable on site and are able to apply them.
28
All manuals and user guides at all-guides.com
l
EDKZNXXXX−002 DE/EN/FR 3.0
Publicité
Table des Matières
