Dell PowerConnect M6348 Guide De Mise En Route page 34

步骤 3 ：
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is the
IP address you use to access the CLI, Web interface, or SNMP
interface for the switch. Optionally you may request that the
system automatically retrieve an IP address from the network via
DHCP (this requires that you have a DHCP server running on the
IP 地 IP 地
network). VLAN [VLAN #1]
CLI Web SNMP
IP 地 IP 地
DHCP
[ DHCP ]
IP 地
To setup an IP address:
Please enter the IP address of the device (A.B.C.D) or enter "DHCP"
(without the quotes) to automatically request an IP address from
IP 地
the network DHCP server. [192.168.2.1]:
IP 地
[A.B.C.D] "DHCP" [ ] DHCP
[192.168.2.1] 192.168.2.1
Please enter the IP subnet mask (A.B.C.D or /nn). [255.255.255.0]:
IP [A.B.C.D /nn] [255.255.255.0]
255.255.255.0
步骤 4 ：
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable. [0.0.0.0]:
IP 地
[0.0.0.0]
This is the configuration information that has been collected:
User Account setup = = root
Password = ******** = ********
IP 地
Management IP address = 192.168.2.1 255.255.255.0 =
192.168.2.1 255.255.255.0
Default Gateway = 0.0.0.0 = 0.0.0.0
步骤 5 ：
Do you want to select the operational mode as Simple Mode? [Y/N]
[Y/N] n
32