Dell PowerConnect M6348 Guide De Mise En Route page 33

To setup the SNMP management account you must specify the
management system IP address and the "community string" or
password that the particular management system uses to access the
switch. The wizard automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell Network
Manager or other management interfaces to change this setting and
to add additional management systems later. For more information
on adding management systems, see the User's Guide.
Dell Network Manager
To add a management station:
Please enter the SNMP community string to be used [public]:
SNMP
注：
仅激
SNMPv1/2c
看等
Please enter the IP address of the Management System (A.B.C.D)
or wildcard (0.0.0.0) to manage from any Management Station
{0.0.0.0}:
{0.0.0.0}
步骤 2 ：
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts and
changing privilege levels, see the user documentation.
[ 15]
To setup a user account:
Please enter the user name.
Please enter the user password:
Please reenter the user password:
IP 地
[public]
默认 别
禁 SNMPv3 直 返回而
IP 地
192.168.2.100
[
)
public
SNMP
SNMPv3
[A.B.C.D]
CLI
[root]:root
********
SNMP
15]
权限 别
擎 ID
[0.0.0.0]
Web
********
31