Page 1
For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, visit: U.S.A.: http://shop.panasonic.com/support Canada: www.panasonic.ca/english/support Register online at http://shop.panasonic.com/support (U.S. customers only) La referencia rápida en español se puede encontrar en la página 19. TQBJ2048...
Your system and the illustrations can look differently. Product Identification Marking is located on the bottom of the unit. This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and IMPORTANT SAFETY (2) this device must accept any interference, including...
(1) This device may not cause harmful interference, and area. (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support...
Bluetooth SIG, Inc. and any use About Bluetooth ® of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Panasonic bears no responsibility for data and/or information that can possibly be compromised during a Google Play and Android are trademarks of Google Inc.
Making the connections Preparing the remote control Connect the AC power supply cord only after all the other connections have been made. Connect the FM indoor antenna. Put the antenna where reception is best. Use alkaline or manganese battery. Install the battery so that the poles (+ and –) align with Adhesive tape those in the remote control.
Overview of controls Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Top view Standby/on switch [`], [1] Mute the sound Press to turn the unit from on to standby mode or vice To cancel, press the button again.
[OK]. “PAIRING” is shown. Press [USB/CD] to select “CD”. To cancel, select “OK? NO”. Press [CD x] (main unit: [x OPEN/CLOSE]) to Select “SC-HC295” from the Bluetooth ® menu of open the sliding door. the device. Put in a disc with the label facing towards you.
Basic playback Android™ device version lower than 4.1 requires the CD USB BLUETOOTH installation of the “Panasonic Music Streaming” app (free of charge). For details on the app, refer to the site below. Play Press [4/9]. http://panasonic.jp/support/global/cs/audio/app/ (This site is in English only.)
Page 9
Play menu Input level CD USB BLUETOOTH You can change the input level setting if the sound input Press [PLAY MENU] repeatedly to select level of the Bluetooth ® transmission is too low. “PLAYMODE” or “REPEAT”. Press [PLAY MENU] repeatedly to select Press [R, T] to select the setting and then press “INPUT LEVEL”.
█ Selecting a preset station Radio Press [PLAY MENU] repeatedly to select “TUNEMODE”. Preparation Press [RADIO/AUX] to select “FM”. Press [R, T] to select “PRESET” and then press [OK]. Manual tuning Press [2/3] or [5/6] to select the preset station. Press [PLAY MENU] repeatedly to select “TUNEMODE”.
Play timer Clock and timers (Except for Bluetooth ® source) You can set the timer to come on at a certain time to wake you up. Setting the clock Preparation This is a 12-hour clock. Set the clock. Press [SETUP] repeatedly to select “CLOCK”. Press [SETUP] repeatedly to select “TIMER ADJ”.
Sound effects External equipment You can connect the AUX IN terminal to a portable audio Press [SOUND] repeatedly to select the sound equipment, PC, etc., to use this system as a speaker for effect. enhanced sound quality. Press [R, T] to select the setting and then press Preparation [OK].
• Read the operating instructions of the device for details. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website.
® – Disconnect the AC power supply cord and then audio output to “SC-HC295” manually. Read the operating connect it again. instructions of the device for details. Press [1] again to turn on the unit. If the problem persists, consult your dealer.
█ Main unit displays Remote control code “--:--” When other Panasonic equipment responds to the • You connected the AC power supply cord for the first time remote control of this system, change the remote control or there was a power failure recently. Set the clock.
Specifications █ █ Amplifier section Bluetooth section ® RMS output power stereo mode Version Bluetooth ® Ver. 2.1 + EDR Front Ch (both ch driven) Class Class 2 10 W per channel (8 Ω), 1 kHz, 10% THD Supported profiles A2DP, AVRCP Total RMS stereo mode power 20 W...
If your product does not work properly because of a defect in THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR materials or workmanship, Panasonic Corporation of North CONSEQUENTIAL DAMAGES RESULTING FROM THE America (referred to as “the warrantor”) will, for the length of...
Ninety (90) days This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original...
Spanish quick reference / Radio Referencia rápida en Español Preparación Pulse [RADIO/AUX] para seleccionar “FM”. Sintonización manual Cómo realizar las conexiones Pulse [PLAY MENU] repetidas veces para Conecte el cable de alimentación de CA sólo después seleccionar “TUNEMODE”. de haber hecho todas las demás conexiones. Pulse [R, T] para seleccionar “MANUAL”...
Temporizador de reproducción Reloj y temporizadores (Excepto para la fuente de Bluetooth ® Puede configurar el temporizador para activarse a una hora determinada y despertarle. Configuración de la hora Preparación Este es un reloj con un sistema de 12 horas. Configure el reloj.