CYCLE GUIDE — TIMED CYCLES
Settings shown and options in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle,
the default time appears in the
display. Use the "+" and "–"
buttons to increase or decrease
the time in 1-minute increments.
Touch and hold to change the
time in 5-minute increments.
The maximum dry time is 150 minutes.
Items to dry:
Cycle:
Any load
Timed Dry
NOTE: Select Air
Only to dry foam,
rubber, plastic,
or heat-sensitive
fabrics.
Small loads and
Rapid Dry
sportswear
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than
1/4 full.
Temperature:
Default
Time:
40
15
Selecting the Temperature
A High heat setting may be used for drying heavyweight items such
as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-
weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various
loads, refer to the care label directions.
Available
Options:
Wrinkle
Use to dry items to a damp level for items
Prevent
that do not require an entire drying cycle.
Select a drying temperature based on
the type of fabrics in your load. If you are
unsure of the temperature to select for a
load, select the lower setting rather than
the higher setting.
Wrinkle
For small loads of 3–4 items.
Prevent
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Cycle Details:
7