Program Setting - Aqua Medic Ocean Light LED Control Mode D'emploi

Programmable light control for Aqua Medic Ocean Light LED
1. Technical Data
- safety tension 24 V
- dimensions: 11 x 5 x 1.9 cm
2. Unpacking
On unpacking, please check the light control immediately for any damages. In case of any complaints,
please contact your dealer directly.
3. Included in shipment
Ocean Light LED Control
•
A Y-cable for connecting several Ocean Light LED's to one control unit is available as accessory.
Pict. 1: Y-cable for Ocean Light LED
4. Installation

4.1. Program setting

The Ocean Light LED Control may only be used on the designated socket (pict. 2, No. 1) of an Ocean
Light LED.
Pict. 2: 1 = socket for Ocean Light LED Control
Buttons:
M: menu
OK: confirm
up
＋
down
－
First of all, please move the battery switch up on the back side of the Ocean Light LED Control (ON)
to start the dimmer.
6