Aqua Medic Ocean Light LED Control Mode D'emploi page 7

1. The light is still on when the controller is connected to an Ocean Light LED. The time appears on
the display.
2. Press "M" (menu), then four setting options appear:
Time: for setting the real time
Manual: for manual adjustment
Fixed Mode: fixed program of sunrise and sunset
Setting Mode: An automatic program according to the user's needs can be adjusted.
1. Press the "M"-button (menu) again to choose "Time", "Manual", "Fixed Mode" or "Setting Mode".
Press "OK" to confirm the selected version chosen by the +/- buttons.
2. First of all, set the real time. Use "+" or "-" to move cursor to choose "Time", press "OK" to enter
the setting. Then use "+" or "-" to adjust the real time and press "OK" to confirm.
3. Following settings are possible in the menu "Manual":
Line 1: for white LEDs
Line 2: for blue LEDs
000%: You can set the brightness from 1% to 100%, 0% means brightness off.
ON: switch on or off
Press "+" or "–" to select line 1 or 2 and confirm by "OK". The cursor will go to the chosen position.
Press "M" to move to the next step for setting and press "OK" to confirm.
4. Following settings are possible in the menu "Fixed Mode":
If ON was chosen and confirmed by OK, then the light turns on automatically according to the
following schedule:
White channel (1)
09:00 to 09:30, 0% to 100%
09:30 to 20:00, 100% to 100%
20:00 to 20:30, 100% to 0%
20:30 to 09:00, 0% to 0%
Blue channel (2)
08:30 to 09:00, 5% to 100%
09:00 to 20:30, 100% to 100%
20:30 to 21:00, 100% to 5%
21:00 to 08:30, 5% to 5%
Choose the "Setting Mode" and press "OK" to confirm.
5. Choose channel 1 or channel 2 (1 is for white, 2 is for blue).
There are five programs in the Setting Mode:
00:00 to 00:00 for time period setting
000% to 000% for adjustment of the brightness
For example: If you set 6:00 to 6:30, 0% to 100%, then the light will light up from 6:00 and in 30
minutes will go up to 100% brightness. This means that the brightness will increase about 3,33 %
every minute. At 6:30, 100% are reached.
If you set 6:00 to 8:00, 1% to 100% (or 100% to 1%), the brightness will increase or decrease by
0,83% every minute.
This kind of setting can simulate the sunrise and sunset.
If the light shall not get constantly brighter, set 6:00 to 18:00, 70% to 70%. Then it will light up at
70% for 12 hours.
7