Clock Setting; Microwave Cooking - Cata MC 20 D ENC Manuel Utilisateur

Operation Instructions

1. Clock Setting

When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press "Clock/Kitchen Timer" once to select clock function, the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press "Clock/ Kitchen Timer", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "Clock/Kitchen Timer" to finish clock setting. ":" will flash, and the time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press
back to the previous status automatically.

2. Microwave Cooking

Press "Microwave./Grill/Combi" the LED will display "P100".Press
"Microwave./Grill/Combi" for times or turn "
and "P100", "P80" "P50", "P30" or "P10" will display for each added press. Then press
"Start/+30Sec./Confirm" to confirm, and turn "
Press "Start/+30Sec./Confirm" again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the
oven as the following steps.
1) Press "Microwave./Grill/Combi" once, the screen display "P100".
2) Press "Microwave./Grill/Combi" once again or turn "
power.
3) Press "Start/+30Sec./Confirm" to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press "Start/+30Sec./Confirm" to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
"Stop/Clear", the oven will go
" to choose the power you want,
" to set cooking time from 0:05 to 95:00.
" to choose 80% microwave