Installer Checklist And Service; Installer Checklist; Before Calling Service; Product Data Rating Label - Thermador HPCN36WS Instructions

Installer checklist and service

Installer checklist

Final check
Specified clearances maintained to cabinet
surfaces.
Appliance is level.
All packaging material removed.
Proper ground connection.
Owner is aware of location of the main circuit
breaker.
Write the model number (E-Nr) and serial number
found on the Product Data Rating Plate in the Use
and Care Guide Leave the Use and Care Guide
.
and the Installation Instructions with the owner of
the appliance.
To clean and protect exterior surfaces
• The stainless steel surfaces may be cleaned by wiping
with a damp soapy cloth, rinsing with clear water and
drying with a soft cloth to avoid water marks. Any mild
glass cleaner will remove fingerprints and smears.
• To polish and protect stainless steel, apply a stainless
steel conditioner with a soft cloth. The Thermador
Stainless Steel Conditioner is available for purchase in
the online accessories store (US only)
(www.thermador.com/us/accessories). Order part
number 00576697 (spray bottle) or 17002200 (wipes).
Do not use conditioner on non-steel surfaces, logos,
control markings, labels, black or smudge-proof
stainless steel, and appliance interiors.
• DO NOT allow deposits to remain for long periods of
time.
• DO NOT use ordinary steel wool or steel brushes.
Small bits of steel may adhere to the surface causing
rust.
• DO NOT allow salt solutions, disinfectants, bleaches
or cleaning compounds to remain in contact with
stainless steel for extended periods. Many of these
compounds contain chemicals which could prove
harmful. Rinse with water after exposure and wipe dry
with a clean cloth.
21

Before calling service

Troubleshooting
See the Use and Care Guide for troubleshooting
information. Refer to the Limited Product Warranty in the
Use and Care Guide. Please be prepared with the
information printed on your product data rating plate
when calling.
To reach a service representative, see the contact
information at the back of the manual. Before calling,
please note the complete model and serial number
printed on your product data rating label.
Product data rating plate
The data rating plate shows the model (E-Nr) and serial
number. Refer to the data plate on the appliance when
requesting service. The data rating plate is located on the
frame behind the filter. Remove the filter to view it.