Hansgrohe PuraVida 15070 1 Serie Guide D'installation Et Garantie page 6

10 mm

2
19 mm
1
English
Install the adapters on the stops (1).
Install the filters.
Failure to install the filters may
result in unsatisfactory operation
of the faucet.
Connect the hot and cold supply hoses to the
adapters (2).
Use two wrenches as shown.
Do not allow the hoses to twist.
Test the faucet. Check all connections for leaks.
Model 15074XX1 only
Install the pull rod.
Install the drain.
Test the faucet. Check all connections for leaks.