Electrolux EFC 90344 Mode D'emploi page 24

38 38 38 38 38 electr electr electr electr electrolux olux olux olux installation olux
• • • • • Fix the hood to the wall with screws
as shown.
Note: Note: the lower fixing points are Note:
Note: Note:
visible removing the fats filters and
they are at the sides and/or at the
centre of the hood (after having
removed the frame of the carbon
filter, if present, in the latter case).
In any case, we recommend using
the lateral holes, when available, to
GB
increase the stability of the hood.
5x45 5x45
5x45 5x45 5x45
• • • • • Fix the collar to the exhaust outlet.
3,5x9,5 3,5x9,5 3,5x9,5 3,5x9,5 3,5x9,5
5x45 5x45 5x45 5x45 5x45
5x45 5x45 5x45 5x45 5x45
• • • • • Fully tighten the screws fixing the box
to the motor body.
• • • • • Slide the power supply cable into its
housing.
Carry out the electrical connection to
the mains power supply.