Electrolux EFC 90344 Mode D'emploi page 20

34 34 34 34 34 electr electr electrolux electr electr olux olux olux installation olux
Installation Installation
Installation Installation Installation
W W W W W ar ar ar ar arning! Do not connect the appliance to the mains until the installation is fully ning! Do not connect the appliance to the mains until the installation is fully ning! Do not connect the appliance to the mains until the installation is fully ning! Do not connect the appliance to the mains until the installation is fully ning! Do not connect the appliance to the mains until the installation is fully
complete. complete.
complete. complete. complete.
• • • • • Drawing a line on the wall with a pencil up to the ceiling, corresponding to the
centre line, will make the installation operations easier.
• • • • • Apply the perforation diagram to the wall: the vertical centre line printed on the
perforation diagram should correspond to the centre line drawn on the wall. In
addition, the lower edge of the perforation diagram corresponds to the lower
edge of the hood.
GB
• • • • • Drill a hole.
• • • • • Remove the hole diagram, and insert plugs and screws as shown.
• • • • • Partially tighten the screws.
1cm