Electrolux EFC 90344 Mode D'emploi page 21

• • • • • Apply flues support bracket to the wall touching the ceiling. Use the flues
support bracket as a perforation diagram (the small slot in the support must
coincide with the line previously drawn on the wall, if present), and mark two
holes with a pencil.
• • • • • Make the holes and insert 2 dowels.
• • • • • Fix the flues support bracket to the wall with 2 screws.
• • • • • For Extractor V For Extractor Version only For Extractor V For Extractor V For Extractor V ersion only ersion only ersion only ersion only - rear exhaust outlet: Make an opening on the wall
for the exhaust pipe.
• • • • • For Extractor V For Extractor V For Extractor V ersion only ersion only
For Extractor V For Extractor Version only ersion only ersion only - ceiling exhaust outlet: Make an opening in the
ceiling for the exhaust pipe.
• • • • • Prepare the electrical connection to the mains power supply.
Ø 8 Ø 8
Ø 8 Ø 8 Ø 8
> 1cm
Ø 16cm
> 5cm
electrolux electrolux installation electrolux
electrolux electrolux
Ø 8 Ø 8 Ø 8 Ø 8 Ø 8
9,5cm
Ø 16cm
V Hz
5x45 5x45
5x45 5x45 5x45
> 1cm
X - 2cm
> 3cm
X cm
35 35 35
35 35
GB