Hamilton Beach Commercial 58850 Mode D'emploi page 5

Parts and Features
Filler-Cap: The filler-cap has markings for easy measuring, to make fine
dressings and marinades. When fill-cap is removed, ingredients can be
added or the tamper may be inserted into the lid.
Lid: The lid fits securely into blender jar and can be easily removed
by lifting the tab. To keep the spout of the pitcher mess-free, place
tab above the handle of the pitcher.
Tamper: The tamper mixes thick or frozen mixtures that cannot be
processed with regular blending. It prevents air pockets from forming
and is a handy tool when making nut butters.
Blender Jar: The durable jar is clearly marked with ounces, cups, and
milliliters.
Cutting Blade Assembly: The cutting blade assembly is permanently
installed in the blender jar.
Jar Pad: Simply lift to remove the rubber pad for easy cleaning.
Control Buttons: Two buttons are located on top of the base. Use
START/STOP with any setting. Use PULSE with any variable speed.
Control Knob: Rotate knob to desired blending mode: VARIABLE
SPEEDS, SMOOTHIE, CRUSH, PUREE, and CLEAN.
Variable Speeds: Select any speed for blending and pulsing by rotating
the control knob from 1 to 10. Blender will turn off automatically after
blending for 5 minutes when using a variable speed or PULSE.
Base: Contains the motor. DO NOT IMMERSE BASE IN WATER.
Sleep Mode: After 10 minutes of inactivity, the display panel will go
into Sleep Mode and have a blank screen. To end Sleep Mode, move
control knob.
Motor Protection Device: The Hamilton Beach Professional Blender is
equipped with motor overheating protection. If the motor stops during
operation due to overheating, unplug and allow it to cool down for
about 15 minutes. Plug blender back in to resume normal operation.
(cont.)
Preparing the Blender: After unpacking the blender, wash everything
except blender base in hot, soapy water. Dry thoroughly. Wipe blender
base with a damp cloth or sponge. DO NOT IMMERSE BASE IN
WATER. Care should be taken when handling cutting blade assembly
since it is very sharp. Refer to care recommendations on page 17.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call our
customer care center to obtain replacement parts.
Selecting Blender Settings: Select from four program settings or use
the variable speeds precise speed control.
WARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.
5