Hamilton Beach Commercial 58850 Mode D'emploi page 7

Using Program Settings
6
Press START.
8
To stop the blender at any time during the program, press STOP. If
reactivated by pressing START/STOP again, the program will start at
the beginning. Rotate control knob to
FOR HOT LIQUIDS
NOTE: Do not blend hot liquids
for more than 3 minutes. Allow
blender to cool between each
use.
9
(OFF).
(cont.)
WARNING
Burn Hazard.
When blending hot liquids,
remove filler-cap of two-piece
lid. Do not exceed the 6-cup
(1420-ml) level. Hot liquids may
push off two-piece lid during
blending; therefore, with the
protection of an oven mitt or
thick towel, place one hand on
top of the lid, keep exposed
skin away from the lid, and start
blending at lowest speed.
10
Unplug.
WARNING
Burn Hazard.
Metal parts under blending jar get hot after use. Do not touch.
7
Timer display will begin to count
down. Blender will automatically
stop at the end of the program
and display will show END.
11
Remove lid.
7