Kohler K-6284 Guide D'installation Et D'entretien page 12

Bidet Water Supply (Optional)
7. Install the Water Supply
All Installations
IMPORTANT! Optional bidet water supply for the K-6300 Bowl is
shown. Do not install a second water supply unless a hidden bidet
seat will be installed.
Install the water supply pipes, following all local codes.
Connect the waste pipe following all applicable local codes.
Installations With a Bidet Seat
Optional: Install the bidet water supply and a quarter turn, 1/2"
NPT supply shut-off.
IMPORTANT! The bidet supply shut-off must extend 3" (76 mm)
minimum to 4" (102 mm) maximum from the finished wall to allow
access to the handle. The supply shut-off handle should be no
higher than 5/8" (16 mm) from the center of the water supply.
1142998-2-D
3-1/2" (89 mm)
Maximum Clearance
from the Front of
the Finished Wall
12
5/8"
(16 mm)
Kohler Co.