Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT DIMENSIONS AND CLEARANCES
Width
Front of Bullnose
Height to trim.
Trim to be flush
or higher than
countertop.
to Front of Door
WARNING
horizontal combustible surfaces must have
an Auto-On feature. Refer to hood installation
instructions for specific hood clearances.
other stone.
CAUTION
To prevent drafts from
in floor under appliance and behind
** As defined in the National Fuel Gas Code (ANSI
from non-combustible materials are not part of the
ADDITIONAL CLEARANCES:
each side.
Working areas adjacent to the rangetop should have
cutout to back edge of countertop and 3 in. minimum
4
Design Information
Countertop
to Cooking
Surface
leg Height
Universal Utility Locations
Electric
to Combustibles
Non-
Min.
Combustible
Material **
Minimum
Each Side
Back
Island
Cutout
to Adjacent Wall
31-2000814 Rev. 2
Publicité
Table des Matières
