Random Play
(Using the Remote Control)
The tracks will play in no special order when you use this
mode.
• To enter Random Play mode, stop playback first.
1
Press the PLAY MODE button on the
Remote Control until the "RANDOM"
indicator lights.
Press the 3/8 button.
2
The tracks are played in random order.
To skip a track during playback, press the ¢ button
to jump to the next track in the random sequence. Press the
4 button to jump back to the start of a track being played.
To exit Random Play mode, while the CD Player is
stopped, press the PLAY MODE button to light off the
"RANDOM" indicator and carry out Normal Play.
Repeating Tracks
(Using the Remote Control)
You can repeat all tracks or individual track, as many times
as you like.
Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button,
as shown below.
=
ALL=blank display = (back to the
beginning)
:
Repeats one track.
ALL:
In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks
in the program.
In Random Play mode, repeats all the tracks
in random order.
To exit Repeat mode, press the REPEAT button until the
Repeat indicator on the display goes out.
I Repeat mode remains in effect even when you change the
play mode.
Child Lock
You can prevent the unwanted CD ejection by locking.
• Before proceeding, check the position of the ¢ button
on the Unit, then turn off the System.
To Lock the CD Ejection
Hold down the ¢ button and press the % button on the
Unit.
"LOCKED" appears on the display.
To Release the Lock
Perform the same procedure when you locked.
"UNLOCKED" appears on the display.
Using the CD Player
20