Using The Tuner; Tuning In A Station - JVC VS-DT6 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Tuner

1
2
Number
4
5
buttons
8
7
10
BASS
SET
MD/AUX
FM/AM
DISPLAY
FM/AM
AHB PRO
CLOCK
COLOR
/TIMER
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be
tuned in manually, automatically, or from preset memory
storage.
I Before listening to the radio:
• Make sure that both the FM and AM antennas are cor-
rectly connected. (See page 4 and 5).
One Touch Radio
Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.
I You can switch from any other sound source to the radio
by pressing the FM/AM button on the Remote Control (or
the SOURCE button on the Unit).

Tuning In a Station

1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM.
AM
(on the Remote Control)
G Using the SOURCE button on the Unit
Each time you press the button, the sound source
changes.
SOURCE
(on the Unit)
15
STANDBY/ON
3
PLAY MODE
6
+10
REPEAT
9
FM MODE
FM MODE
+
10
TREBLE
SET
CANCEL
DIMMER
SLEEP
OPEN/
CLOSE
VOLUME
FM/AM
FM
FM
AM
MD/AUX
PRESET+
SOURCE
PRESET
SOURCE
Band display, Frequency display, Preset channel
STEREO MONO
FM mode indicators
2
Select a station using one of the follow-
ing methods.
G Manual Tuning
Press the 4 or ¢ (
move from frequency to frequency until you find the
station you want.
G Auto Tuning
If you press and hold the 4 or ¢ (
ton for one second or more, the frequency changes
down, or up, automatically until a station is found.
G Preset Tuning using the Remote Control
(Possible only after presetting stations)
Select the desired preset number using the Number
buttons on the Remote Control. (For the preset num-
ber more than 10, press the +10 button then the Num-
ber button.) After 1 second the display will show the
preset number's band and frequency.
Example:
Press the +10 button then the 2 button continuously.
The preset number 12 "P12" appears.
+
10
2
G Preset Tuning using the Unit
Press the PRESET+ button to select the desired preset
number.
Its band and frequency are displayed.
• In AM broadcast, reception sensitivity will be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
VOL
or
) button repeatedly to
OR
or
) but-
OR
(After 1 second)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vs-dt8Ca-vsdt6Sp-vsdt6

Table des Matières