Connecting An Md Recorder, Etc (Digital Output); Connecting The Ac Power Cord; Installing The Unit On The Stand - JVC VS-DT6 Manuel D'instructions

Connecting an MD Recorder, etc (Digital Output)

Remove the cap and connect an optical digital cord (not supplied) between the System's CD DIGITAL OUT terminal and the
input terminal of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.

Connecting the AC Power Cord

Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
The provided AC power cord for this unit has certain one-way direction connections to
prevent electric shock. Refer to the illustration for correct connection.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYS-
TEM TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET
WHEN GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR
AN EXTENDED PERIOD OF TIME.

Installing the Unit on the Stand

You can place the Unit vertically by attaching the supplied Stand.
Attach the Stand to the Unit and tighten the screw.
Stand (supplied)
• Avoid an unstable place when placing the Unit vertically. Select a place on the level surface.
Cap
CD DIGITAL
OUT
Optical digital cord (not supplied)
Screw (supplied)
MD recorder, etc. (not supplied)
Attach the Legs to the Stand.
Getting Started
AC IN
Power cord
Back of the Leg
Legs (supplied)
8