Troubleshooting - MC Crypt PPA8 Notice D'emploi

Troubleshooting

By purchasing this mobile PA system, you have acquired a state-of-the-art product which operates reliably.
Nevertheless, problems or malfunctions may occur. For this reason, the following is a description of how you can
eliminate possible malfunctions yourself.
Please observe the safety instructions!
No function, the POWER LED next to the MASTER VOL (5) control does not light up:
• Device is not switched on.
• Battery is discharged. Charge the battery until the CHARGE LED on the back of the device goes out.
No function in MP3 mode:
• Remove the respective storage medium and insert it again.
• The storage medium is not compatible. Try using a different storage medium.
The POWER LED next to the MASTER VOL (5) control is lit, but there is no sound:
• The LEVEL (1, 2, 3) controls or the MASTER VOL (5) control have been turned all the way to the left.
• The microphone, the instrument or the audio source is not properly connected. Check the connection.
• The microphone, the instrument or the audio source is not switched on.
• In MP3 mode no storage medium has been inserted or the inserted storage medium is empty.
• The storage medium used for MP3 mode is not compatible. Try using a different storage medium.
Playback is distorted:
• The LEVEL (1, 2, 3) controls or the MASTER VOL (5) control have been turned too far to the right.
• The output level of the audio source is too high. See the "Specifications".
Repairs other than those described above should only be carried out by an authorised
specialist.
32