Table des Matières
Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. M12x50 (10.9)
*******M* E: 120 Nm
2. Existing Nuts
*******M* E: 108 Nm
3. M6x20 (10.9)
*******M* E: 20 Nm
4. M12x22 (100)
*******M* E: 160 Nm
5. Exisiting Nut
*******M* E: 40 Nm
*******M* P: 105 Nm
*******M* P: 108 Nm
*******M* P: 20 Nm
*******M* P: 150 Nm
*******M* P: 40 Nm
© 4017070/22-04-2022/7
Publicité
Table des Matières
