Krups XP345 Mode D'emploi page 33

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
PROBLEMS
Water is leaking under the
appliance.
The cups have been filled
unequally.
The pump is abnormally
hot.
The espresso leaks over
the edges of the filter.
Your espresso tastes bad.
POSSIBLE CAUSES
There's an internal leak.
The drip tray has not been
fitted correctly.
The drip tray is overflowing. Empty and carefully rinse
The filter holder is clogged. Please
There is no water in the
tank.
The filter holder is not
positioned correctly.
The rim of the filter holder
is encrusted with coffee
grounds.
The soft pod is positioned
incorrectly.
The appliance was not
rinsed
correctly
descaling.
SOLUTIONS
Check that the tank is
fitted correctly. If the leak
continues, do not use
the appliance, contact an
approved service centre.
Check that the drip tray is
pushed to the back of the
appliance.
the drip tray and replace.
refer
paragraph on CLEANING
AND
SERVICING
servicing your filter holder.
Fill the tank with water
and re-initiate the pump
(see paragraph: USING
FOR THE FIRST TIME).
Avoid emptying the tank
completely.
Put the filter holder in place
and lock it (turning it from left
to right as far as it will go).
Remove excessive coffee
grounds that prevent the
filter holder to be locked.
Remove excessive coffee
grounds and clean the grid
through which water passes
with a damp sponge.
Check that the soft pod has
been inserted correctly: the
paper must not protrude
out of the filter.
Rinse
the
after
according
instructions and check the
quality of the coffee.
to
the
for
appliance
to
the
30

Publicité

Table des Matières
loading

Table des Matières