Krups XP345 Mode D'emploi page 31

B. Descaling the steam system
„ „
Place a container under the steam wand (9).
„ „
Turn the selector knob (D1) directly to the steam nozzle (D1-4) (without switching
on the preheat function) (D1-3).
„ „
Switch on the appliance by pressing the on/off button (6).
„ „
Leave the mixture to flow through the steam nozzle until steam appears.
„ „
Turn the selector knob to the O position (D1-1) (12).
„ „
At this time the appliance will cool automatically, starting two to three pump cycles
intermittently. Hot water and/or steam will flow into the drip tray.
„ „
Wait 2 to 4 minutes, then repeat the procedure.
„ „
Ensure that you do not empty the tank completely (in the case of deactivation, see
paragraph: USING FOR THE FIRST TIME).
C. Rinsing
IMPORTANT!
After descaling, rinse two or three times with clean water (without coffee),
as described in the paragraph on " USING FOR THE FIRST TIME".
Do not forget to rinse the steam nozzle. The appliance has been descaled
and is ready to use again.
This appliance carries a manufacturer's 2 year guarantee. This product has been
designed for domestic use only. Any commercial use, inappropriate use or failure
to comply with the instructions, the manufacturer accepts no responsibility and the
guarantee will not apply.
Any repairs that have to be carried out due to a build-up of limescale shall not be
covered by the guarantee.
For any after-sales problem or for spare parts, please contact an approved service
centre.
GUARANTEE
28