Krups XP345 Mode D'emploi page 32

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
SOLUTIONS TO POSSIBLE PROBLEMS
PROBLEMS
The
grounds
damp.
The
espresso
through too slowly.
The user sees prolonged
water flow from the filter
holder after making an
espresso.
Presence of coffee grounds
in the cup.
No crema on the espresso. The coffee is too old.
The water tank leaks when
carried.
29
POSSIBLE CAUSES
are
very
You haven't added enough
ground coffee.
flows
The ground coffee is too
fine, too greasy or floury.
The filter holder is dirty.
The grid through which the
water passes is clogged.
Your appliance has a build-
up of limescale.
Scale build-up is occurring
on your machine because
of particularly hard water.
The filter holder is clogged. Clean the filter holder with
The coffee is too fine.
The hinge on which the
filter holder is mounted is
clogged.
The coffee is not suitable
for espresso.
There is too little coffee in
the filter.
The valve at the bottom
of the tank is dirty or
defective.
The valve is blocked by
limescale.
SOLUTIONS
Add more coffee.
Choose a slightly more
granular coffee.
Clean
the
filter
according to the instructions
in paragraph CLEANING
AND SERVICING - B. The
filter holder. Clean also the
filter.
When the appliance has
cooled, clean the grid with
a damp sponge.
Descale
your
according to the instructions
in the user manual.
Immediately
your machine as per the
directions for use.
hot water.
Use
a
slightly
granular coffee.
Clean
the
filter
mount and hinge with a
damp sponge.
Use freshly ground coffee.
Use finer ground coffee.
Add ground coffee.
Clean the water tank and
open the valve at the bottom
of the tank with a finger.
Descale
your
according
to
instructions in the user
manual.
holder
machine
descale
more
holder
machine
the

Publicité

Table des Matières
loading

Table des Matières