Quick Start - NEC AccuSync LCD5V Mode D'emploi

Quick Start

Attaching / Removing the Base (LCD5V/LCD7V)
Install
1. Align the four hooks on the bottom of the monitor with the corresponding slots on the
bottom of the base.
2. Slide the base in the direction of the arrows.
Remove
1. Depress the hook as indicated.
2. Remove the base in the direction of the arrows.
ASLCDmanual022803.p65
Insure the lock is hooked completely.
Hook
position
4
Remove direction
4
2/28/03, 9:43 AM