NEC MultiSync M700 Mode D'emploi page 9

Controls cont.
This bar provides adjustment for changing the level of sound effects, acting as an
equalizer.
NOTE: Select desired setting based upon your application.
Language: OSM
™
OSM Position: You can choose where you would like the OSM image to appear
on your screen. Selecting OSM Position allows you to manually adjust the OSM
menu left, right, up or down.
OSM Turn Off: The OSM menu will stay on as long as it is in use. In the OSM
Turn Off sub-menu, you can select how long the monitor waits after the last
touch of a button to shut off the OSM menu. The preset choices are 10, 20, 30,
60, 120 seconds.
OSM Lock Out: This control completely locks out access to all OSM functions.
When attempting to activate OSM while in the lock out mode, a screen will appear
indicating that OSM is locked out. To activate the OSM Lock Out function, press
PROCEED, then
Out, press PROCEED, then
System: ENABLE: The IPM System works normally and all stages
IPM ™
DISABLE: The Off Mode of the IPM System is not used.
NOTE:For standard systems and graphics boards, keep the
factory setting at ENABLE.
Factory Preset: Selecting Factory Preset allows you to reset all OSM settings back
to the factory settings. A warning statement will appear to confirm that you do
want to reset ALL settings. Individual settings can be reset by highlighting the
control to be reset and pressing the RESET button.
15500291.wpc
menus are available in 6 languages.
and hold down simultaneously. To de-activate the OSM Lock
and hold down simultaneously.
of energy savings are utilized.
9
7
7/27/99, 3:41 PM