Oceanic OCEAFC207W Guide D'utilisation page 68

top of the freezer to prolong the shelf life of fresh foods.
Note: Once the refrigerator is in operation, you'd better use it
continuously; and under normal circumstances, do not stop using it, so
as not to affect the service life.
Defrosting
After a period of use, a thin layer of frost forms on the surface of the
inner wall of the freezer compartment (or evaporator), which can affect
the cooling effect if the thickness exceeds 5 mm. In this case, you need
to gently scrape off the ice with an ice scraper rather than using metal
or sharp objects. The ice must be removed every 3 months, and if the
normal use of drawers and normal access to food is affected by icing,
make sure to remove the ice on time. Follow these steps to remove
frost:
1. Remove frozen foods, turn off the power, open the refrigerator door
and gently remove ice from the interior wall with an ice scraper. To
speed up the thawing process, it is suggested to place a bowl of hot
water in the refrigerator / freezer, and when frost off, use a scraper
to remove it, then remove the cubes.
2. After defrosting, clean inside the refrigerator / freezer and turning
on the power supply.
Lamp Replacement
The LED lamp is used by the refrigerator for lighting, which is
characterized by low power consumption and long service life. In case of
anomaly, please contact customer service for a service call, the lamps
can be replaced only by the manufacturer, as well as part of the unit.
Security control a maintenance
~ Is the cord broken or damaged?
~ Is the socket firmly inserted in the outlet?
~ Does overheat the socket abnormally?
Note: An electric shock and a fire accident may occur if the power
cord and plugs are damaged or stained with dust. In case of anomaly,
unplug the power outlet and contact the seller.
EN-30