Before First Use - Oceanic OCEAFC207W Guide D'utilisation

VI. BEFORE FIRST USE
✓ Waiting time
Once the refrigerator is installed properly and well cleaned, do not
turn away. Make sure to start the refrigerator on after over an hour
of waiting, to ensure normal operation.
✓ Cleaning
Check the accessories inside the refrigerator and wipe the inside
with a soft cloth.
✓ Turning
Insert the plug in the socket full to start the compressor. After 1 hour,
open the freezer door, if the temperature inside the freezer
compartment down visibly, it indicates that the refrigeration system is
operating normally.
✓ Food Storage
After a certain operating time of the refrigerator, the temperature
inside the refrigerator is automatically controlled according to the
temperature set by the user. Once the refrigerator is completely
cooled, add the food, which generally need 2 to 3 hours to be
completely cooled. In summer, when the temperature is high, more
than 4 hours it takes for the food cooled completely (try to open as
little as possible the refrigerator door before the internal
temperature cools).
If the refrigerator is installed in a wet area, make sure the ground
wire and the fault circuit are normal. If vibration noises occur due to
contact with the wall of the refrigerator or the wall becomes blackened by
the convection of the air around the compressor, move the refrigerator
wall. The installation of the refrigerator may cause interference noise or
chaos images on the cell phone, landline telephone, the radio receiver,
the TV that surrounds it, so try to keep the refrigerator as far as possible
in this case.
EN-24