Installation Of The Indicator Of Temperature - Oceanic OCEAFC207W Guide D'utilisation

19. Attach the top hinge on the upper left side of the cabinet with the
three screws you removed earlier.
Before tightening the screws of the
upper hinge, make sure the top of the
door is flush with the case and that the
rubber gasket ensures a tight seal.
20. Install the hinge cover on the hinge
at the top left of the cabinet.
V. INSTALLATION OF THE INDICATOR
Regulate the temperature:
Refrigerator temperature is controlled by the control panel mounted in
the refrigerator compartment.
(1) Under normal operating conditions (spring and fall), it is
recommended to set the mode 5-8.
(2) In summer, when the ambient temperature is high, it is
recommended to set the mode 2-4 to ensure the temperatures of the
refrigerator and freezer extending the operating time of the
refrigerator; and in winter, when the ambient temperature is low, it is
recommended to set the mode to avoid 2-4 stops / Frequently steps
of the refrigerator.
(3) Quick Cooling: When this function is activated, refrigerator
temperature and the freezer can be reduced rapidly at the same
time, so that food can be kept in a fresh state without nutritional value
is lost. The maximum operating time of rapid cooling function is 26
hours, after which the refrigerator returns to the previous mode,
which is set before the rapid cooling function is activated.
Note: If the '2' or '5' or '8' indicator light flashes, the refrigerator is out of
order. Please contact customer service for on-site service as soon as
possible.
OF TEMPERATURE
EN-23