Husky 33201 Notice De Montage, D'installation Et D'emploi page 5

11. Install clip nuts (#8) onto both frame brackets as shown. (See Figure 6) Position the driver side frame bracket
(#1) and passenger side frame bracket (#2, not shown) up against the outer surface of the truck frame with the
mounting tabs positioned over the frame and under the bed in line with previously drilled holes in bed.
(See Figure 4)
Figure: 6
Frame Bracket #1 shown.
#2 is opposite (not shown)
12. Place the drivers side bracket front tabs (#1) over the wiring loom and underneath the truck bed.
(Do not pinch wires) (See Figure 7A)
Place the passenger side bracket front tab (#2) over the heat shield and under the truck bed.
(See Figure 7B)
Figure: 7A Driver Side Front
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. See www.huskytow.com for Warranty Information /
Tech Support / Product Updates. ©2020 Keystone Automotive Operations Inc. All Rights Reserved. August 21, 2020-Rev4
Bed Corrugation
Bracket
Wire Harness
Truck Frame
Figure: 7B Passenger Side Front
Heat Shield
Truck Frame
Page - 5