Ipod™ (Optional); Playback; Searching For A Desired Song; Searching By Playlist - Alpine CDA-9857 Mode D'emploi

iPod™ (Optional)
Rotary encoder
SOURCE/POWER
MODE
An iPod™ can be connected to the CDA-9857 by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i). When the
CDA-9857 is connected by using the cable, the controls on the iPod™
are not functional.
About iPods™ usable with this unit
The unit can be used with third generation and above iPod™, iPod™
photo, iPod™ minis or iPod™ nano. iPod™ Shuffle cannot be used,
however.
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Forth generation iPod: Ver. 3.0.2
iPod photo: Ver. 1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
• The unit cannot be used with the software versions earlier than
"2005-02-22." For details about "iPod Software Update," refer to
the iPod Instruction Manual.

Playback

1
Press SOURCE/POWER to switch to the iPod
mode.
1
TUNER XM/SIRIUS*
3
CHANGER* TUNER
1
* Only when XM Radio or Sirius Radio is connected.
2
* Only when the iPod is connected.
3
* Only when the CD changer is connected.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
3
To pause playback, press
Pressing / again will resume playback.
• If a song is playing on the iPod when it is connected to the
CDA-9857, it will continue playing after the connection.
22
-EN
/ 4 5
FUNC. Preset buttons
TITLE
(1 through 6)
2
DISC iPod*
/ .

Searching for a desired Song

An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the CDA-9857 can use these to ease song
6
searches.

Searching by Playlist

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the Playlist
search mode, then press
Playlist Artist
3
1
Turn the Rotary encoder to select the desired
*
Playlist.
4
Press /
The selected Playlist is played back.
To search for a song in the selected playlist
1 After selecting the playlist in step 3*
to the song search mode of the selected playlist.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• In the search mode, pressing FUNC. will return to the previous
mode.
• All songs in the iPod are played back by selecting the stored "iPod
name" in step 3*
• Playlist search cannot be made during M.I.X. play.
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the Playlist search mode.

Searching by artist name

1
Press to activate the search selection mode.
2
Turn the Rotary encoder to select the Artist search
mode, then press
Playlist Artist
3
* 2
Turn the Rotary encoder to select the desired
Artist.
4
Press /
The selected Artist song is played back.
To search for an album of the selected artist
1 After selecting the artist in step 3*
to the album search mode of the selected artist.
*1
2 Turn the Rotary encoder to select an album.
3 Press the
album.
.
Album Song
.
1
, press
1
.
.
Album Song
.
2
, press
/ to play back all songs of the selected
Playlist
to change
for at least 2
Playlist
to change