Sat Radio Receiver (Optional); Receiving Channels With The Sat Radio Receiver (Optional); Checking The Sat Radio Id Number - Alpine CDA-9857 Mode D'emploi

SAT Radio Receiver
(Optional)
Rotary SOURCE/
encoder POWER
/
FUNC.
MODE
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following operations
may be performed. However, the XM Receiver and
SIRIUS Receiver cannot be connected at the same
time.
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
100 digital audio channels. For a small monthly fee, subscribers can
hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM's website at
www.xmradio.com., or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest Alpine dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the CDA-9857 are operative only when
a SAT Receiver is connected.
1
Press SOURCE/POWER to select SAT Radio mode.
2
Press BAND to select between one of the three SAT
Radio Preset Bands.
Each press changes the band:
XM mode:
XM1 XM 2 XM 3
SIRIUS mode:
SIRIUS 1 SIRIUS 2 SIRIUS 3
3
Press or to select desired category.
4
Press or to select the desired channel.
Holding down or
continuously.
BAND MENU
Preset buttons TITLE
(1 through 6)
XM1
SIRIUS 1
will change channels
• When using the optional remote control (RUE-4190, etc.), an SAT
Radio Channel can be directly called up with the numeric keypad of
the remote control.
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number is input.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of the CDA-9857 in the following way.
XM:
1
While receiving a SAT Radio band, press
to select channel "0" for XM.
The unit alternately displays channel No. "0" for 4 seconds,
then the ID number for 10 seconds.
While displaying "RADIO ID" as shown above,
Demonstration (page 18) become nonfunctional.
2
To cancel the ID number display, set the channel to
other than "0."
SIRIUS:
1
While receving a SAT Radio band, press
to select channel "255" for SIRIUS.
2
Press TITLE until the ID No. appears in the display.
Category Name
Channel No./Channel Name
*
Composer Name
ID No.
(Blank)
(Blank)
3
To cancel the ID number display, set the channel to
other than "255".
• You cannot use "O," "S," "I," or "F" for the ID Number (XM radio
Receiver only).
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
* When the Scroll setting (page 18) is set to "Auto", the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
or
or
*
ID No.
ID No.
Channel No./Channel Name
Calendar/Clock
Category Name
Channel No./Channel Name
19
-EN