Cleaning And Caring Of The Casing; Changing The Light Bulb - De Dietrich K9388 Guide D'utilisation

EN
4 / CARING FOR AND CLEANING YOUR APPLIANCE
or flashes). Once the clean filter has been
refitted, press the button E (while the central
segment is lit up or flashing) and restart the hour
counter.
Models DHD497 / DHD790
The charcoal filter must be replaced about every
120 hours of operation (when, with the motor
off, the LED L2 turns red or flashes red). Once
the clean filter has been refitted, press the button
E (while the LED L2 is red or flashing) and restart
the hour counter.
• Replacing the charcoal filter (Fig. 19)
Remove the metal grille (Fig.17) and the grease
filter (Fig.18).
Remove the charcoal filter by pressing the catch
inwards and turn the charcoal filter until the two
tabs come out of their seats (Fig.19).
Charcoal filter ref. no.
AH4063U1
CLEANING AND CARING OF THE
•
CASING
Avoid products containing abrasives when
cleaning the casing.

CHANGING THE LIGHT BULB

•
Warning
Before carrying out any work, the
power supply to the hood must be turned
off, either by unplugging it or by using the
circuit breaker switch.
To reach the lamps you remove the metallic
support tightening the two screws (Fig. 20) and
moving it oo the right;
to replace the halogen lamps tighten the locknut in
the anti-clockwise direction and pull out the bulb
(Fig.21). Replace the lamps of the same type.
29
fig. 19
fig. 20
fig. 21