Care; Cleaning The Outer Surfaces; Changing The Carbon Fil- Ter - De Dietrich DHV 7962 X Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
4

CARE

CLEANING THE OUTER SURFACES

To clean the outer surfaces on your
hood, use soapy water and do not use
scouring creams or scouring sponges.
4.1 - CLEANING THE FILTER CAS-
SETTES
They must be cleaned after every
30 hours approximately of use or at least
once a month. Use a brush, warm water
and a mild detergent. Rinse and dry
them carefully before putting back in
place.
- Lift and hold the door.
- Slide the cassette filter (1) downwards.
- Remove the grease trap (2) by lifting it
upwards.
- Wash, rinse and replace
4.2 - CHANGING THE CARBON FIL-
TER
This filter holds odours; it should be
replaced after approximately 120 hours
of use.
Order these filters from your dealer.
- Remove the filter cassettes.
- Remove the two metal fixings (4)
- Remove the carbon filters (3)
- Fit new filter on to the filter cassettes.
- Re-position the 2 fixings (4).
- Fit the filter cassette back in place.
- Repeat this operation for all filter cas-
settes.
4.3 - CHANGING THE LED LAMPS
Contact after sales service.
29

Publicité

Table des Matières
loading

Table des Matières